109 VGX-XL100 Living Room Entertainment Computer
Event:
I want to confirm a physical address (MAC address) for a built-in wireless LAN
Comment:
Check the physical address (MAC address) for the built-in wireless LAN of
this device. Follow the instructions below.
1 Click Start on the Windows taskbar and then select All Programs >
Accessories and click Command Prompt. The Command Prompt screen
displays.
2 Enter "ipconfig /all" and press the Enter key.
3 Check the physical address (MAC address) in the Physical Address field of
"Ethernet adapter Wireless Network Connection".
Cancel the network bridge if a network bridge has been created.
Event:
I want to end the wireless LAN communication.
Comment:
• Turn off the wireless LAN function.
Refer to the Appendix A: Wireless Local AreaNetwork in this guide.
Event:
I cannot communicate using Access Point Mode.
Comment:
• It is impossible to communicate with another access point via wireless
LAN using the Access Point Mode. Change your wireless LAN to Station
Mode when you want to communicate with another access point.
• Please check your security settings when you connect other devices to
your VAIOaccess point. Old types wireless LAN devices may be
connected using the 64 bit WEP security only.
• Your VAIO supports the wireless channels 1 - 13. Some wireless LAN
devices only support the channels 1-11 , so that you cannot use channels
12,13 with these devices. Please check which channnels your device is
supporting, and change your wireless channel on your VAIO to automatic
or to 1 - 11.
• As your VAIO has a feature to access limitation, you can refuse
connections from devices which do not have registered MAC adresss.
