Control
26
Flipping Images Horizontally and
Vertically
Enabling images to be flipped vertically
Write the following 3 commands in sequence.
Disabling vertical flipping of images
Write the following 3 commands in sequence.
Enabling images to be flipped
horizontally
Write the following 3 commands in sequence.
Disabling horizontal flipping of images
Write the following 3 commands in sequence.
Bus Synchronization
Enabling bus synchronization
Write the following 3 commands in sequence.
Disabling bus synchronization
Write the following 3 commands in sequence.
Memory Shot
Switching to Memory shot mode
Write the following three commands in sequence.
Switching to normal mode
Write the following three commands in sequence.
When the Memory shot mode is set, the following
control registers become effective.
Operation when the trigger mode is set
1
Before starting, stop video and open the
isochronous resource.
2
Set trigger mode to ON.
3
Switch to Memory shot mode.
4
Read F0F40004 to obtain the maximum number of
frames.
5
Write 010000nn for F0F40000 to start recording.
(nn represents the number of frames to be used for
recording.)
6
Input triggers required number of times.
Address Data
F0F30000 08004600
F0F30004 0048FFFF
F0F30008 80000000
Address Data
F0F30000 08004600
F0F30004 0048FFFF
F0F30008 00000000
Address Data
F0F30000 08004600
F0F30004 0049FFFF
F0F30008 80000000
Address Data
F0F30000 08004600
F0F30004 0049FFFF
F0F30008 00000000
Address Data
F0F30000 08004600
F0F30004 0036FFFF
F0F30008 80000000
Address Data
F0F30000 08004600
F0F30004 0036FFFF
F0F30008 00000000
Address Data
F0F30000 08004600
F0F30004 0010FFFF
F0F30008 80000000
Address Data
F0F30000 08004600
F0F30004 0010FFFF
F0F30008 00000000
Address Data
F0F40000 010000nn Starts recording and obtains
the status information.
F0F40004 Obtains the number of frames
that can be recorded.
