7
The three symbols are shown below, indicating which alarm
is set.
Your radio includes a dual alarm function. The two alarms,
ALARM 1 and ALARM 2 can be set with dierent wake-up
times, then you can set either or both alarms to wake you. You
can also choose to be woken by a beep sound, a DAB station
preset or an FM station preset. Before using the alarms, you
must store your preferred wake-up settings.
STORING PREFERRED WAKE-UP SETTINGS:
Press and • hold the ALARM 1 or ALARM 2 button to
choose the alarm you want to set.
The display will conrm which alarm (ALARM 1 or ALARM 2) you
selected. The alarm time will be shown with the minutes digits
ashing.
Press the • ] or [ button to set the minutes digits.
Press the • SELECT button to conrm the minute setting.
The hours digits will ash.
Press the • ] or [ button to set the hours digits.
Press the • SELECT button to conrm the hour setting.
The display will now show a volume setting.
Press the • ] or [ button to set the alarm volume level.
Press the • SELECT button to conrm.
NOTE:- Ensure that the wake-up volume settings are set at a
high enough level to wake you.
The display will now show a Beep tone number.
Press the • ] or [ button to choose beep tone 1 or 2 for
this alarm.
Press the • SELECT button to conrm.
The display will now show a DAB preset number.
Press the • ] or [ button to choose a DAB preset station
to wake to.
Press the • SELECT button to conrm.
The display will now show an FM preset number.
ALARM FUNCTIONS
If either of the alarms have been set to wake you, the ALARM
indicator(s) will be shown on the display as shown below-
Press the • ] or [ button to choose an FM preset station
to wake to.
Press the • SELECT button to conrm.
NOTE:- Refer to the previous page (STATION PRESETS) for
information on how to store preset stations. If you choose an
unassigned ‘free’ preset number in error, the alarm will play
the last station that was tuned.
ACTIVATING THE ALARMS:
Once you have stored your preferred wake-up settings, you can
activate either or both of the alarms to wake you.
To activate your chosen alarm:
Press the • ALARM 1 or ALARM 2 button repeatedly to step
through the wake up options you can choose from the list
shown below-
Set the radio to Standby before going to sleep.•
Alarm indicator
position
Snooze indicator
NOTE:- The above examples show DAB Preset 3, FM Preset 1
and Buzzer Tone 1 as preferred wake-up settings.
WHEN THE ALARM SOUNDS
To switch o the alarm
Press the • ALARM 1 or ALARM 2 button or press the
STANDBY button to switch o the alarm that is sounding
and set the radio to Standby.
To extend the alarm for a further 9 minute ‘snooze’.
Press the • SNOOZE button to switch o the alarm that is
sounding.
The alarm will switch o for a 9 minute period, and the ‘Snooze’
indicator will show on the display to indicate ‘snooze’ mode.
Alarm 1 set Alarm 2 set Alarms 1 & 2 set
