EN
Troubleshooting Tips
Problem
System doesn’t turn
on
No sound
Poor radio
reception
CD doesn’t play
CD sound skips
CD button do not
respond
Cannot play mp3
disc
Solution
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device
• Adjust volume setting.
• Make sure you’ve selected the correct function
• Adjust the antenna for better reception
•Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights
• Make sure you’ve put a CD in the tray
• Make sure the CD’s label is facing up
•Try another CD
• Make sure that Pause mode is not activated
• Make sure CD function is selected
• Clean the CD (as explained in “Maintenance”)
• Check CD for warping, scratches, or other damage
• Check for vibration or shock that may affect the unit; move the set if
necessary.
• Switch to another function and then back to CD.
• Clean the disc.
• Make sure files are saved under .mp3 extension. e.g. Rocky08.mp3
• Check that the recorded bit rate is within 32kbps and 320kbps.
• WMA files cannot be played.
• When using mixed mode CD or CD-Enhanced disc, only the audio CD
tracks can be played.
• Make sure the files are in MPEG 1/2 layer 3 format.
11
TM9235 EN 12/10/04, 10:32 AM15
