A SERVICE OF

logo

8-9
O
PTIONAL
D
EVICES
Memory expansion
8. Lift into the left the insulation sheet covering the memory module and secure
the sheet with tape to keep it out of your way.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
NOTE: The slot A is reserved for main memory. Use the slot B for
expanded memory. If only one card is installed, use the slot A.
Figure 8-7 Lifting into the left the insulation sheet.
9. Insert a new module in the socket and push it down so it lies flat and is
secured by two latches on either side.
Figure 8-8 Installing the memory module.
S
LOT
A
S
LOT
B