3 Tests and Diagnostics 3.21 ONLY ONE TEST
3-52 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
OK message appears in the display if the test ends without a defective.
NG message appears in the display if a defective is found during the test.
Confirm the connection of cable, then execute the test again.
Press 9 and return to ONLY ONE TESST menu.
Subtest 06 Remocon (Remote control, [AUDIO])
This subtest checks if AUDIO button of attached remote controller works
properly.
The following message appears in the display.
[[[Remote Control test]]]
Press [AUDIO] button!
Press AUDIO button of the remote controller and return to the ONLY ONE
TEST menu.
Subtest 07 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Confirm the LED of HDD status blinks properly.
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
