8. Operation by a copy function
8-3
8. 2 Copy to inverter
There is no data in LCD, and copy it to LCD at the time of purchase.
(Chap.: 8.1)
Push the F3 key on an initial screen and the copy mode screen is displayed. It is not
possible to drive with the [RUN] key in the following 3～5 screen display.
1 Select the memory saving group using the
control dial.
2 Select copy direction [Copy to the inverter
memory] using the control dial.
It is not possible to copy to the inverter
when there is no information in the selected
memory. Copy to the LCD first
(ref.: Chapter 8.1).
3 Display of copy waiting
Copy starts when the [F4] key is input
4 Display of copy loading（fixed screen）
Copy finishes in 1 minute. . When the copy
is not completed even if it waits 2 minutes
or more, please reset a power supply and
copy again.
5 Display of copy finish
Return to the copy direction window
as above “2” when press the ESC key
after copy.
.
Finish
Copy was completed normally.
Please push ESC-key.
CRC code：6AE3
Co
Mode
Memor
- A
To
［Co
to the inverte
］
Co
Mode
Grou
selection
To
Info
Memory - A
Memory - B
［Copy to the inverter］
［Copy to the LCD memory］
Top
Co
Mode
Memor
- A
Grou
selection
Waiting
Please push F4 key
when starting
［LCD メモリへコピー］
Start
Co
Mode
Memor
- A
To
［Co
to the inverte
］
Co
Mode
Memor
- A
［Co
to the inverte
］
F4
