TD-W8910G 54M Wireless ADSL2+ Router User Guide
)
Note:
If you are not sure about the PPP IP extension and PPP Debug Mode, please don’t select this
option.
Figure 4-7
5) Enable the IGMP Multicast and WAN Service on the screen above, if you are not sure
about the IGMP, just leave the default setting. Note that if you want to adopt the PPPoA
service, you have to select the Enable WAN Service option in the screen above, or else
the service will not take effect.
6) Click the Next button, and you will see the next screen which displays the detailed
settings you’ve made (shown in
Figure 4-8).
Figure 4-8
7) If you are sure about the configuration, click the Save button to save these settings,
otherwise click the Back button to return to the previous screen to make modifications.
The information is same as the information in
Figure 4-3.
21
