TRENDnet TEW-633GR Manual

A SERVICE OF

next previous

19

Basic_Network Settings

Use this section to configure the internal network settings of your router. The IP Address that is

configured here is the IP Address that you use to access the Web-based management interface. If you

change the IP Address here, you may need to adjust your PC’s network settings to access the

network again.

WAN Port Mode

This option controls how the device reacts to traffic on the WAN connector. In this case the

Term “port” refers to the Ethernet connectors on the device.

Router Mode

Select this option if the WAN port is connected to the Internet, the device functions as a NAT

router.

Bridge Mode

Select this option if the device is connected to a local network downstream from another router.

In this mode, the device functions as a bridge between the network on its WAN port and the

Devices on its LAN port and those connected wirelessly. The Router IP Address field below