A SERVICE OF

logo

TW100-BRV204 User Guide
98
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specifying
the Source and Destination addresses for the "Filter Properties". Instead, for both IP Filters, the
Filter Properties- Addressing should be completed as follows.
Figure 83: Windows 2000 Server - Addressing
The Source Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on the TW100-BRV204's LAN.
The Destination Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on the Windows 2000 LAN.