A SERVICE OF

logo

Open as PDF
next previous
9
AC 4600 Pro
OPERATING MANUAL
EDITION 06/2012 PART NO. DOC394871
2.4.1 CORRECT USE
2.4.2 EXPLOSION PROTECTION IDENTIFICATION
2.4.3 MAXIMUM SURFACE TEMPERATURE
2.4.4 SAFETY INSTRUCTIONS
2.4 USE IN AN EXPLOSION HAZARD AREA
4HEUNITISSUITABLEFORWORKINGLIQUIDMATERIALSINACCORDANCEWITHTHECLASSIlCATIONINTO
EXPLOSIONCLASSES
As defined in the Directive 94/9/CE (ATEX 95), the unit is suitable for use in areas where
there is an explosion hazard
.
II 2G X
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 (Zone 1)
G: Ex-atmosphere gas
X: See: "Special Notes" in the operating manual
3AFEHANDLINGOF7!'.%2SPRAYUNITS
-ECHANICALSPARKSCANFORMIFTHEUNITCOMESINTOCONTACTWITHMETAL
)NANEXPLOSIVEATMOSPHERE
 $ONOTKNOCKORPUSHTHEUNITAGAINSTSTEELORRUSTYIRON
 $ONOTDROPTHESPRAYGUN
 5SEONLYTOOLSTHATAREMADEOFAPERMITTEDMATERIAL
)GNITIONTEMPERATUREOFTHECOATINGMATERIAL
 %NSURETHATTHEIGNITIONTEMPERATUREOFTHECOATINGMATERIALISABOVETHEMAXIMUM
SURFACETEMPERATURE
-EDIUMSUPPORTINGATOMIZING
 4OATOMIZETHEMATERIALUSEONLYWEAKLYOXIDIZINGGASESEGAIR
#LEANING
)FTHEREAREDEPOSITSONTHESURFACESTHEUNITMAYFORMELECTROSTATICCHARGES&LAMESOR
SPARKSCANFORMIFTHEREISADISCHARGE
 2EMOVEDEPOSITSFROMTHESURFACESTOMAINTAINCONDUCTIVITY
X: The maximum surface temperature corresponds to the permissible material temperature.
This and the permissible ambient temperature can be found in the Technical Data.
2.5 GERMAN REGULATIONS AND GUIDELINES
See chapter 3.3