29932 (Rev. 8/10/2007)
REF PART QTY DESCRIPTION
1 29750 1 Right and left caster bundle
2 12243 1 Caster yoke (includes bolt, nut &
sleeve)
3 29746 (a) 1 Right caster arm asy, 13-5/32"
long -or-
3 6761 (a) 1 Right caster arm asy, 16-5/32"
long
4 29747 (a) 1 Left caster arm asy, 13-5/32" long
-or-
4 18424 (a) 1 Left caster arm asy, 16-5/32" long
5 19703 1 8" HD Caster wheel with sleeve
7 ----- * 1 Straight 1/4 self-tapping grease
fitting (for steel wheel) -or-
7 195 * 1 Straight 1/8P thread grease fitting
(for polyethylene wheel)
8 21020 1 1/4 x 1-1/4 Spirol pin -or-
8 1285 * 1 1/4 x 1-1/2 Cotter pin
9 12296 * 1 1/4 - 28 Straight grease fitting,
15/32" long
10 12169 * 2 3/8 NC x 1-1/4 HHCS GR5
11 838 * 2 3/8 Standard lock washer
12 835 * 2 3/8 NC Hex nut, plated
13 765 * 1 1/2 NC Hex lock nut
14 23479 1 1/2 NC x 5 HHCS GR5
15 29368 (c) 1 1/2 x 3/4 OD x 3-3/8 Sleeve -or-
15 12242 (c) 1 17 GA Wall x 5/8 OD x 3-3/8 tube
16 29375 (b) 2 3/4 Bore flanged bearing for 1-1/8
hole -or-
16 4228 (b) 2 5/8 Bore flanged bearing for 1-3/8
hole -or-
16 2905 (b) 2 5/8 Bore flanged bearing for 1-1/8
hole -or-
16 65578 (b) 2 3/4 Bore x 1.385 flanged wheel
bearing with groove
17 22240 2 3/4 x 1-3/16 x 10 GA Washer
18 4181 2 25/32 x 1 x 1/2 Heat-treated
sleeve
* Obtain locally, standard hardware
(a) For proper caster arm identification, refer to
dimension “L” as shown on drawing. The caster
arms may be used on either side to obtain best fit.
(b) Measure old bearing.
(c) Measure outside diameter of old sleeve.
