A SERVICE OF

logo

Open as PDF
next previous
10 Paper and other Media
Xerox WorkCentre 4250/4260 User Guide 159
3. Load envelopes short edge feed
and with the flaps facing up.
4. Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max. Fill Line.
The UI screen shows the current paper supply settings for the Bypass Tray on the
right hand side.
Select the Size, Type and/or Color buttons if necessary to change the settings.
If the settings are correct, select the Confirm button.
Please refer to Setting the Paper Size in the Paper and other Media chapter on
page 160.
Bypass Tray
Paper Guide
Max Fill Line