400 B/W Reflection Densitometer
4-64-6
3. Read a tint of the solid color you just measured. During
measurement, DOT is displayed. Then, the Dot value is
displayed.
4. Measure additional tints of that color. The instrument
automatically recognizes the measurements as tint values and
displays the tint percentage.
5. When you are ready to measure another color, simply measure
the solid and repeat the procedures beginning with #2. The
instrument automatically recognizes the measurement as a
solid. Also, you do not need to enter a new paper measurement.
Display Messages
If any display messages that have not been covered in this chapter
appear during any of the dot gain functions, see “Miscellaneous
Display Messages” at the end of Chapter 3 for an explanation and
instructions.
