7 - 11
DRIV
FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR
●
Install the dust boots.
●
Install the dust boot bands.
OTE:
●
The new boot bands may differ from the
original ones.
●
The dust boots should be fastened with the
dust boot bands 3 at the grooves in the joint
shaft.
*****************************************************
3.Check:
●
Free play (thrust movement)
Excessive play → Replace the joint
assembly.
ASSEMBLING THE DIFFERENTIAL GEAR
1.Measure:
●
Gear lash
Refer to “MEASURING AND ADJUSTING
THE DIFFERENTIAL GEAR LASH”.
2.Install:
●
Gear motor
3.Check:
●
Differential gear operation
Unsmooth operation → Replace the
differential gear assembly.
Insert the double off-set joint into the
differential gear, and turn the gear back and
forth.
