ADJUSTING SOUNDS
40
You can adjust following sound settings: BASS, TREBLE, L/R BALANCE, EQ MODE, and the DIRECT mode.
These settings have no effect on the recorded sound during
recording.
1 Press SOUND repeatedly to select the setting
you want to adjust.
Each time you press SOUND, the display changes as
follows:
*
The currently selected EQ mode is displayed in the DVD
receiver display.
2 Rotate MULTI JOG to adjust each setting.
BASS: Adjusts the BASS level.
(–10 to +10 dB)
TREBLE: Adjusts the TREBLE level.
(–10 to +10 dB)
L/R BALANCE: Adjusts the speaker balance.
(L+6 dB to R+6 dB)
EQ MODE: Selects the equalizer mode.
(ROCK, POP, JAZZ, CLASSIC,
FLAT)
DIRECT: Turns on/off the DIRECT mode.
When this is set to ON, a sound
comes directly without Digital
Signal Processor (DSP) processing.
3 Press MULTI JOG.
y
• You can select the EQ MODE by pressing EQ on the remote
control repeatedly.
• You can turn on/off the DIRECT mode by pressing DIRECT on
the remote control.
ADJUSTING SOUNDS
Note
STANDBY/ON
PHONES TIMER
DISPLAY SOUND MODE
VOLU ME
INPUT
PUSH-ENTER
MULTI JOG
MULTI JOGSOUND
Adjusting Sound Settings
BASS
TRE. (TREBLE)
BAL. (L/R BALANCE)
EQ MODE*
DIRECT
