Filter
Top Products
Basic Operations (continued)
Selecting a MENU language
Press to display the menu mainMENU
1
Press repeatedly to display menu pageVOL+/- settings
2
Press twice to select item.CH language6
3
Press to select the appropriate language:
, and .
VOL+/-
English French Spanish
4
Press to exit.MENU
5
Select input source signal
Press the button to access menu.SOURCE source
11
Press or to select a desired input channel.VOL+ VOL-
2
Press to confirm and the unit display signal from the
selected input channel.
ENTER
3
source
VGA
AD
C1 C2
AV TV
A--------VGA, select signal from VGA (15-pin D-sub) terminals.
D--------DVI, select signal from DVI terminals.
C1------YPbPr1/ ,select signal from YPbPr1/ terminals.
C2------YPbPr2/ ,select signal from YPbPr2/ terminals.
AV -----VIDEO (SVIDEO), select signal from S-Video or Video terminal.
The S-Video is prior to Video terminal when they are connected at the same time.
TV ------Select TV signal.
YCbCr1 YCbCr1
YCbCr2 YCbCr2
settings
menu background
language
close caption mode
close caption off on on mute
close capt. background
source select
opaque
cc1
English
right/left to source select
Using the SOURCE button
Press to display the menu mainMENU
1
Press repeatedly to select item.CH source select6
3
Press to access menu.VOL+ source select
4
Press to display menu page.VOL+/- settings
2
Using source select menu
Press or to select a desired input channel.CH CH56
5
Press to confirm and the unit displays signal from the
selected input channel.
ENTER
6
opaque
settings
menu background
language
close caption mode
close caption off on on mute
close capt. background
source select
opaque
cc1
right/left to change language
opaque
English
22
Note:
This unit identifies the type of component video terminals automatically. If you connect
the screen displays on the bottom-right corner. Similary, if the component
video terminals are ,
terminals,
the screen displays on the bottom-right corner.
Y, Cb, Cr
YPbPr detected
YCbCr detected
Y, Pb, Pr