Filter
Top Products
Adjustment in PC (VGA) Mode (continued)
Changing the Scaling mode of Image
Press to display the menu mainMENU
1
Press to select item.CH image size6
3
Press to select or .VOL+/- fill all Normal
4
Press to exit.MENU
5
Press to display menu page.VOL+/- window
2
Changing the Position of Image
Press to display the menu mainMENU
1
Press / to select or item.CH h position v position56
3
Press to adjust the value of the item until the
screen is well-aligned.
VOL+/-
4
Press to exit.MENU
5
After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned.
Press to display window menu page.VOL+/-
2
Displaying the Information
When the button is pressed in PC (VGA) mode, the unit displays some information such as the
vertical frequency and resolution.
DSP
Fill All
Normal
---this mode stretches the input vertically and horizontally to fill the full screen.
---this mode displays the incoming picture with normal ratio.
This mode is
the default mode.
50
window
50
image size
h position
v position
freeze window off on
digital pan and zoom
fill all
right/left to change image size
35
50
window
50
image size
h position
v position
freeze window off on
digital pan and zoom
fill all
right/left to adjust h position