Document No. DER-S0017A 11 Rev.1.1 ©2008 DMC Co., Ltd.
TSC-34/RU User’s Guide
8. Precautions for Use
8-1. General Handling
§ Keep the product away from any conductive objects while in use.
§ Do not touch the conductive part of the product to avoid being damaged by the electrostatic discharge.
Follow the proper procedure for handling.
§ Keep the product in the proper storing environment and avoid any load to the product.
§ Do not use or store the product in the severe condition like following:
Wet environment or a condition where the product is likely to get wet.
Where dew condensation is likely to occur.
Near solvent or acid.
§ Do not take apart or alter the product.
8-2. Others
§ The contents of this document are subject to change without notice.
§ The manufacturer or sales representatives will not be liable for any damages or loss arising from use of
this product.
§ This product is intended for use in standard applications (computers, office automation, and other office
equipment, industrial, communications, and measurement equipment, personal and household devices,
etc.) Please avoid using this product for special applications where failure or abnormal operation may
directly affect human lives, or cause physical injury or property damage, or where extremely high levels
of reliability are required (such as aerospace systems, vehicle operating control, atomic energy controls,
medical devices for life support, etc.).
§ Any semiconductor devices have inherently a certain rate of failure. The user must protect against injury,
damage, or loss from such failures by incorporating safety design measures into the user’s facility and
equipment.
TSC-34/RU User’s Guide
Rev. 1.1, March 26, 2008
©2008 DMC Co., Ltd.
This document can be freely distributed, but any alternation to this document is prohibited.
DMC Co., Ltd.
http://www.dmccoltd.com/english/
9
th
floor, Kanda Sento Building, 1-2-4 Yushima, Bunkyo-Ku, Tokyo 113-0034, Japan
Phone: +81-3-5209-7131 (Japanese), 7135 (English) Fax: +81-3-5209-7130