![](http://pdfasset.owneriq.net/1/e8/1e8c0b0a-9cfc-48a8-9d2e-7c70ebe9ad1d/1e8c0b0a-9cfc-48a8-9d2e-7c70ebe9ad1d-bg8e.png)
ACPGR
Adjacent Channel Power Graph On or Off
Determines if the adjacent channel power (ACP) graph function is enabled or disabled.
Syntax
Equivalent
Softkey:
ACPGWR
ON OFF .
Related Commands: ACP, ACPE.
Example
OUTPUT
718;"ACP;"
F&yfoms the adjacent channel power measurement.
OUTPUT
718;"MOV
ACPGR,l;"
l3~~bles
the ACP graph
function
and creates a graph of
ACP as a function of the frequency offset
from
the center
freq=y.
Description
Setting ACPGR to 1, does the following:
w
Turns off the display of the ACP numeric results.
w
Generates a graph of the adjacent channel power ratio, for the selected channel bandwidth,
as a function of frequency spacing from the center frequency.
n Places the graph in trace C.
n Adds the
GRPH
MKR ON OFF softkey to the menu.
n If in continuous measurement mode, the ACP graph will be updated at the end of every
sweep.
5-40
Programming Commands