![](http://pdfasset.owneriq.net/1/e8/1e8c0b0a-9cfc-48a8-9d2e-7c70ebe9ad1d/1e8c0b0a-9cfc-48a8-9d2e-7c70ebe9ad1d-bg207.png)
PCTAMR
Percent AM Response
Returns the percent AM measured by the percent AM measurement (PCTAM).
Syntax
PCTAh4R
Related Commands: MKPX, PCTAM, TH.
Example
OUTPUT
718;"MOV
PCTAM,l;"
OUTPUT
718;"PCTAMR?;"
Turn-s
on the percent AMmeasurement.
Queries PCTAMR.
PCTMR
contains the results
of
the
percent AM?neasurement.
ENTER
718;Percent
Stores the value
of
PCTMR
in the
vam’able
I%rcnt.
PRINT "Percent AM is
",Percent
Prints the results.
OUTPUT
718;"MOV
PCTAM,O;"
Turns
ofl
the percent AM
mmsur~t.
Description
PCTAMR returns a -100 if the PCTAM function has not been turned on, or if the on-screen
signal is not valid or is not present. PCTAM can perform the percent AM measurement only if
there are three on-screen signals that have the characteristics of a carrier and two sidebands.
Also, to be considered a signal, the levels of the carrier and sideband signals must be greater
than the peak excursion above the threshold.
Query Response
output
termination
+
5-418 Programming Commands