Filter
Top Products
29
Additional Operation - VCR part
On Screen Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
11
Press CLK/CNT to display.
Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
22
After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press CLK/CNT again to remove all displays from
the TV screen.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display
window instead of the time by pressing CLK/CNT on
the remote control. The Digital Tape Counter indicates
the relative positions of recordings on the tape.
11
Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00.
Press PLAY or start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
22
Press STOP when playback or recording is complete.
Press r.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
11
Press C.LOCK.
will appear in the display window.
None of the buttons on the front of your VCR will
work (except STOP and EJECT).
If any buttons on the front of your unit are pressed
will flicker in the display window for a few sec-
onds.
22
Press C.LOCK again to switch off the child lock.
will disappear in the display window.
Turning on/off the On Screen
Display
Set the OSD off when dubbing a tape to another
tape.
11
Press i/SETUP.
22
Press or to select F.OSD ON/OFF, then press
OK/ENTER.
33
Press or to select ON or OFF.
44
Press i/SETUP to return to the normal screen.
OPERATION