Filter
Top Products
20
Search Procedure
If your device does not respond to the MF-355RF universal remote
after you have tried all the codes listed for your brand, you may
need to search for your code. This method may also work if your
brand is not listed at all.
Example: to search for your Television Code:
1. Switch your Television on (not on standby).
2. Press the TV key on your MF-355RF.
3. Press and hold down the SETUP key until the
red light (LED under device key) on the MF-355RF
blinks twice.
4. Press 9 9 1, the red light will blink twice.
5. Next, press POWER.
6. Aim the MF-355RF at your Television. Now press
CH+ over and over, until your Television turns off
(every time you press the CH+ key the MF-355RF
will send out a POWER signal from the next code
contained in the memory).
You may have to
press this key many times (up to 150 times)
so please be patient.
If you skip past a code, you can go to the previous
code(s) by pressing the CH- key. Remember to
keep pointing the MF-355RF at your Television
while pressing this key.
7. As soon as your television turns off, press SETUP
to store the code.
- Most TV’s do not switch on pressing the POWER key. Please try
pressing a “number” key to switch your TV back on.
- If you cannot control your Television properly, please continue
the Search Procedure, you may be using the wrong Code.
- To search for the code for another device follow the instructions
above only press the appropriate device key instead of TV during
step 2.
- If the original remote control of your Video recorder or DVD
player does not have a POWER key, press PLAY instead of POWER
during step 5.