Filter
Top Products
ENGLISH
47
En
AS NECESSARY
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
Power supply 120 V AC, 60 Hz
Power consumption 16 W
Power consumption in standby mode
2.9 W
Weight 3.2 kg (7.1 lbs)
External dimensions 430 × 88 × 245 mm (w × h × d)
(17 × 3.5 × 9.9 inches)
Laser Semiconductor Laser,
wavelength
650/780 nm
Signal format NTSC
Supported discs DVD video discs
12 cm (single-sided single-layer,
single-sided double-layer,
double-sided double-layer)
8 cm (single-sided single-layer,
single-sided double-layer,
double-sided double-layer)
Compact discs (CD-DA, video CD)
12 cm and 8 cm discs
S video output Y output: 1 Vp-p (75 ohms, sync
negative)
C output: 0.286 Vp-p
1 Mini Din 4 pin
Video output Video composite output
1 Vp-p (75 ohms, sync negative)
1 RCA jack
Video component output
Y output: 1 Vp-p (75 ohms, sync
negative)
P
B
,P
R
output: 0.7 Vp-p (75 ohms)
1 RCA jacks (P
B
,P
R
, Y)
Audio output Digital output
0.5 Vp-p (75 ohms)
1 Fiber optical connector
1 RCA jack
Analog output
2.0 Vrms (1
kHz, 0 dB, 330
ohms)
2 RCA jacks (L/R)
Audio output characteristics
Signal to noise ratio
More than 105 dB (EIAJ)
Dynamic range
More than 95 dB (EIAJ)
Harmonic distortion
0.003%
Frequency range:
CD/VCD: 2 Hz to 20 kHz
DVD:2 Hz to 22 kHz (48 kHz
sampling)
2 Hz to 44 kHz (96 kHz
sampling)
Wow and flutter: unmeasurable
Operating conditions 5˚C to 35˚C (41˚F to 95˚F)
Accessories Video cable (1)
Audio cable (1)
Remote control (1)
Specifications are subject to change without notice.
SPECIFICATIONS
• Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the double-
D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997
Dolby Laboratories. All rights reserved.
• Manufactured under license from Digital Theater
Systems, Ino. US Pat. No. 5,451,942 and other
worldwide patents issued and pending. “DTS” and
“DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc. ©1996 Digital Theater
systems, Ino. All rights reserved.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the
user’s right or authority to operate this product.