Filter
Top Products
ENGLISH
9
En
PREPARATIONS
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
Connection
type
A on page 10
B on page 11
C on page 12
D on page 13
F on page 15
E on page 14
Input jack of equipment to be
connected to the unit
Digital input jack
Analog audio input jacks (L/R)
Digital input jack
Analog audio input jacks (L/R)
Digital input jack
CONNECTIONS
Before making connections
• Connect the AC cords of the unit and any external
equipment last, after finishing all other connections.
• Insert the plugs completely into the jacks. Loose
connections may produce a humming sound or other
noise interference.
• When using an optical connection, remove the dust cap
from the DIGITAL OUT (OPTICAL) jack on the rear of
the unit. Keep the cap handy. When not using optical
connections, the dust cap should be replaced.
• Refer to the instructions of the connected equipment.
Before connecting, identify your type of audio equipment or TV referring to the following chart. Then, decide the connection
and the setup procedure accordingly.
CAUTION
Do not select “DOLBY DIGITAL/PCM” or “Stream/PCM”
in the “Digital Audio Output” of the setup menu when
connecting to an AV receiver not equipped with a Dolby
Digital decoder or DTS decoder (with an optical or coaxial
connecting cord).
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In such a case, be sure to select “PCM” in
the “Digital Audio Output.”
Audio system to be connected
None (only a TV is connected)
A stereo system or an amplifier
An AV receiver equipped with Dolby Digital
decoder or a Dolby Digital decoder
An AV receiver equipped with DTS decoder
or a DTS decoder
NOTES
• The unit cannot be connected to a TV which is not equipped with a video input connector.
• Use a commercially available stereo-monaural audio cord when connecting to a monaural TV.
NOTES
• If picture noise appears while playing copy-protected
DVDs, connect the unit directly to a TV. Do not connect
through a VCR, TV/VCR, or AV selector.
• For speaker connection, refer to the instructions of the
AV receiver.
CONTINUE