Filter
Top Products
English - 47
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below to the channel number.
1
Press the CH or CH button to tune to the channel that
will be labeled.
2
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
Press the … or † button to
select “Name”, then press
the ENTER button.
3
Press the … or † button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the … or † button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +,
-
,
✽, /, blank).
4
Press the √ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing … or † button, as
above.
Repeat the process to select
the last three digits.
When you have finished,
press the ENTER button.
To erase the assigned new
name, select “Clear” by
pressing the œ or √ button,
then press the ENTER button.
Press the EXIT button to exit.
NOTE
• If you add or delete a
TV channel, the
labeled channels will
also be added or
deleted.
Channel
Antenna : Air
√
Auto Program
√
Add/Delete
√
Favorite Channels
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Name
Move Adjust Return
Input
Picture
Sound
Channel
Setup
Guide
Clear
Clear
Clear
Clear
Clear
Air
2 A
Air
3
Air
4
Air
5
Air
6
▲
▼
▼
Name
Move
Adjust Return
Input
Picture
Sound
Channel
Setup
Guide
Clear
Clear
Clear
Clear
Clear
Air
2 CNN02
Air
3
Air
4
Air
5
Air
6
▲
▼
OK
OK
▼
BP68-00548A-00Eng(030~051) 9/12/05 9:38 AM Page 47