![](http://pdfasset.owneriq.net/d/17/d1785812-be35-411c-95b4-db0e566deb13/d1785812-be35-411c-95b4-db0e566deb13-bg9.png)
After the mount is securely fastened, insert the shaft of the arm into the mount
cup. For the example the Through-Desk conguration was used.
Step 1
Step 2
After securing the bracket to the at panel monitor, insert the shaft of the
tilt mechanism into the forearm.
Fasten the 10-32 x 3/8" Philips Flat Head screw and washer into the
hole in the bottom of the tilt mechanism to secure the monitor onto
the arm.
Step 3
Arm Assembly Page 8