Filter
Top Products
16
1. Channel nr: Shows the current channel number.
2. Tuning mode: Select the mode of TV signal - Cable\HRC Cable\IRC
Cable\ Broadcast.
3. System standard: NTSC-M, Auto.
4. Auto search: Select "Auto Search" to search all signaled channel; when
the searching is complete, it stays at the first channel with signal and all
channels that have been located are stored. If you would like to stop
"Auto Search" during the process, simply by pressing the function button.
5. Fine tune: NTSC-M is seldom used.
6. AFC can be set to ON or OFF. When it is set to ON, the TV will search
the TV signal automatically; when there is any offset in the signal, it will
automatically adjust the channel to the correct position.
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be
skipped by pressing the switching button on the remote control or on the
front panel.
8. Reset to default: Reset to the factory default value.