Filter
Top Products
21
DIGITAL SET TOP BOX
Connect the top box to the input port of the component signal.
How to connect
1. Connect 3 separate component signal cables to the Y, Pb and Pr ports
of the component signal of the Digital TV/ Top Box, and the Y, Pb and Pr
ports of the component signal of theTV set.
2. Connect the audio cable with the audio port of the Digital TV/Top Box
and the audio port of the TV set.
How to use
1. Select COMPONENT.
2. Turn on the DVD set-Top box set.
Warning: In case you notice scrolling images, wrong colors or no color,
no picture or even combinations of these, on your screen, check if the
connections are done in the right way. Check if the cable colors match
with the Input connector colors.
HEADPHONE
1. The headphone jack is located at the rear corner of the TV.
2. The MUTE key on the remote control works on both internal speaker
and the headphone.
3. Use volume key to adjust the volume.