Filter
Top Products
14
SETUP
This menu allows to select the language for the menus as well as the colour of the
screen when there is no video input. It allows also to set an automatic shut-off time.
Display the Main menu by pressing MENU
button.
Select the Options menu using the ⁄button.
Press the OK button to confirm
Use the Ÿ / ⁄ buttons to select each option.
Menu language : To select the language for the menus.
Menu timeout : To set an automatic shut-off time for Menu. Using / ÿ buttons
select 5 > 10 > 20 > 30 > 40 > 50 seconds.
Menu background : Select Opaque or Transparent type.
Sleep Timer : To set an automatic shut-off time. Using / ÿ buttons select Off > 15
> 30 > 45 > 60 > 90 > 120 minutes.
Once the time is ended, TV set automatically switch on standby mode .
If you turn the TV on standby mode after setting the sleep timer, setting will be
erased. Set it again.
Blue Screen : To have a blue screen when there is no video input or when the RF
signal is very bad.
Using the / ÿ buttons select On.
Select Off if you do not want the blue screen.
Teletext language: Using / ÿ buttons, select the character set that wil be used for
Teletext on this channel.
The following character sets are available: West Europe, East Europe, Cyrillic
(Russia), Greek, Arabic, Persian,.
The character set determines how characters are displayed on Teletext screen.
Reset : Return to default settings. Press the OK button to return to default settings.
Press the EXIT button to exit the Options menu.
Note : this menu is removed automatically after a few seconds without using the
remote control.
Note : You can display the remaining time before the automatic shut-off. To do that,
press the sleep button .
To cancel the automatic shut-off, press several times the sleep button to
display Sleep timer Off .