Filter
Top Products
Data Cable Partitions—Installation4
Bonding Data Cable Partitions and ladders
To bond NetShelter Data Cable Partitions to one another:
1. Attach one end of an 8-in ground wire
to a ground stud on the partition and secure the ground
wire with two M6 washers
and an M6 nut
as shown.
2. Connect the free ends of the ground wires to the ground stud on the partition adjacent to the first
partition, and secure the grounding wires with two M6 washers
and an M6 nut
.
Grounding ladders
See “How to Ground the Ladder” in the Cable Ladder Installation with Troughs and Partitions
Sheet, included with each Cable Ladder, for grounding instructions.
NetShelter NetShelterNetShelter
ns0475c