Filter
Top Products
14
A P E X D I G I T A L A D - 1 1 1 0 W
Playing Back a Disc
1. Press the POWER button displayed on the front panel.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
Be sure the playback side is faced down.
3. Place the disc on the disc tray.
4. Press the ENTER/PLAY button.
After closing the disc tray playback will start.
If the disc you want to playback is a DVD disc, the DVD
video player will start playback automatically. If the disc
you want to playback is a CD, press the PLAY button to
start playback.
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or DVD video player.
HOW TO PLAYBACK A DISC.
Basic Playback (see page 10 -12 for connection details)
How to playback DVD video discs.
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source that is connected to the DVD video player.
Set the SPDIF OUTPUT to SPDIF/RAW from the SETUP MENU display if you don’t have
the necessary equipment to enjoy Dolby Digital or DTS surround sound.
POWER
• A disc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the DVD video player to
malfunction.
• Do not force or place anything other than 5”
DVD’s or CD’s on the disc tray.
• The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.
!
!
!