Filter
Top Products
3
1
Installing the
VESA Mount Adapter
To use your Apple Cinema Display (model numbers A1081, A1082, and A1083) with a
VESA-compatible flat-panel mounting solution, install the VESA Mount Adapter on
the back of your display. Follow the installation instructions in this guide.
1
Turn off your display and computer. Unplug the DC power cord from the power
adapter, and unplug the DVI, USB, and FireWire cables from the computer. Carefully
pull the entire display cable assembly through the hole in the stand.
2
Place a soft, clean towel or cloth on a desk or flat surface. Holding the sides of the
display, carefully lay it down so the screen is flat against the towel or cloth on the
desk or surface.
3
Using the hex tool that came with this kit, loosen the screws that attach the stand to
the back of the display as shown in the illustration. Remove the screws and stand and
put them in a safe place in case you want to reattach the stand.
®
¤
Screws
Display cable
Stand
Hex tool
4-2689MAK.book Page 3 Friday, May 28, 2004 2:34 PM