Filter
Top Products
4
English
4
Choose the right screws and bumpers for your size of display. Remove the screws and
bumpers from their plastic bag.
5
Snap the bumpers into place on each side of the mount adapter.
6
Place the mount adapter over the slot on the back of the display as shown in the
illustration below. Use the hex tool to screw the mount adapter to the display.
7
Follow the instructions included with the VESA-compatible mounting solution to
attach your display to the mount.
8
Plug the DC power cord in to the power adapter, and plug the DVI, USB, and FireWire
cables in to the computer.
Mount adapter
Bumpers
Screws
Hex tool
®
¤
Display cable
Mount adapter
4-2689MAK.book Page 4 Friday, May 28, 2004 2:34 PM