Filter
Top Products
Returning to the factory settings
If you would like to return to the original video settings, as they were calibrated at the factory,
follow these steps:
1. Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page.
2. Press the VOL button to set the AUTO setting to ON. This will return all video settings to their
default levels, as set at the factory.
3. You can also return to the factory settings during normal TV viewing by pressing the AUTO.PICT
button on the remote control.
The TV will remember the “custom” settings you had previously chosen.
When you set AUTO to OFF again, your previous custom settings will be
restored.
Descriptions of video settings
The contrast setting controls the relation between the light and black areas of the screen. If the light
areas are too bright and are loosing details, adjust the contrast towards the “-“ position; if the picture
is too gray and lacks contrast, adjust the contrast towards the “+” position.
The brightness setting controls the overall amount of light in the picture. If the picture is too bright,
adjust the brightness setting towards the “-“ position; if the picture is too dark, adjust the brightness
towards the “+” position.
Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple vertical
lines at the edges of an object, adjust sharpness towards the “-“ position; if the vertical edges of on-
screen objects are fuzzy, adjust the sharpness towards the “+” position.
The color setting controls the intensity of color. If the color is over saturated, adjust the color towards
the “-“ position; if the color is washed out, adjust the color towards the “+” position.
The tint setting controls the relationship of red and green in a picture. Tint is especially noticeable in
flesh tones. If the flesh tones seem too red or purple, adjust the color towards “G”; if the flesh tones
are too green, adjust the color towards “R”.
14- Chapter 3: Operating Your TV