Filter
Top Products
• Wheel button is in scroll mode. In PowerPoint® be
sure to push the wheel button gently up and down only,
not in. Pushing in engages scroll mode (the button
illuminates), which does not work in PowerPoint®.
• F5/Esc button does not work. Certain earlier versions
of PowerPoint® and other applications may not support
F5 and/or Esc functions.
• Two or more Tote-Remotes are interfering with each
other. In the unlikely event that you are using two or
more Tote-Remotes in the same location that were
coincidently randomly set to the same ID code in the
factory, you can change the ID code of one of them:
1. Engage the safety lock feature described on page 7.
2. Hold the laser pointer button in and at the same time push
the wheel button down (not in) - hold both buttons in that
position for several seconds until the laser button backlight
(not laser beam) turns off, and then release both buttons.
3. The laser button backlight should flash several times to
confirm that the ID code has been successfully changed.
4. Disengage the safety lock feature (same procedure as
step 1- see page 7).
5. Follow the procedure on page 5 for resetting the receiver
to learn the new ID code of the Tote-Remote.
12