Filter
Top Products
7
Chapter 2
Hardware Setup
Rack Mounting
For convenience and flexibility, the VS1814T / VS1818T can be mounted on
system racks. To rack mount a unit do the following:
1. Using the screws provided in the Rack Mount Kit, screw the mounting
bracket into the side of the unit as show in the diagram below:
1. Important safety information regarding the placement of this
device is provided on page 19. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off.
3. Make sure that all devices you will be installing are properly
grounded.
Phillips hex headPhillips hex head
M3 x 6M3 x 6