Filter
Top Products
11
Chapter 3
Operation
Overview
The VS1814T / VS1818T offers easy and flexible EDID learning and mode
selection through pushbuttons located in the unit’s front and rear panels.
EDID Learn Pushbutton
The VS1814T / VS1818T can automatically learn a display’s EDID by
pressing the EDID Learn Pushbutton located on the front panel. Follow these
steps:
1. Attach the video display/monitor that you want to use to the VS1814T /
VS1818T HDMI Output port (See Installation, page 10).
2. To learn the EDID configuration of the video display/monitor, press and
release the EDID Learn Pushbutton.
3. The EDID Learn LED flashes to indicate that the settings are being
captured, then lights steady to indicate that EDID learning process is
successful.
Note: The EDID Learn LED lights red to indicate that EDID learning process
failed.