Filter
Top Products
- 16 -
Power On Detection Commands
The Power On Detection feature is turned on by default.
The formula for Power On Detection commands is as follows:
Power On Detection + Control command [Enter]
For example, to turn off the Power On Detection feature, input the
following:
pod off [Enter]
The following tables show the possible values for the Control
string
:
Note: Each command can be separated with a space.
Verification
After entering a command, a verification message appears at the
end of the command line as follows:
Command OK - indicates that the command is correct and
successfully performed by the switch
Command incorrect - indicates that the command has the
wrong format and/or values.
Command Description
pod Power On Detection command
Control Description
on Turn on
off
Turn off
vs481a.fm Page 16 Thursday, February 2, 2012 1:21 PM