Filter
Top Products
Atlona Technologies AT-HD610 DVI Stereo/Digital Audio to HDMI™ Format Converter provides an easy and instant
approach for converting digital video (DVI-D) and either digital audio (S/PDIF) or analog stereo audio to digital HDMI™
signal. With this module, DVI based devices such as Computers (Mac/PC) with S/PDIF or analog stereo audio can readily
connect to HDMI™ Display. The HD610 is not only a format converter but also an audio embedder, it will embed digital
or analog audio into HDMI™ output and sync it with video.
• 1x AT-HD610 unit
• 1x 5V DC locking power supply unit (110/240v universal)
• 1x User’s manual
1. Turn on the AT-HD610. Connect the HDMI™ display to HDMI OUTPUT.
2. Dial the rotary control MODE counterclockwise ( ) from 0 to 7.
3. The green STATUS LED will be bright and then dark to indicate the EDID learning is complete.
4. Dial the rotary control MODE clockwise ( ) from 7 to 0. DO NOT let the rotary control arrow pass 6, which will
erase the just learned EDID and reset to default EDID.
1. Only HDMI™ enabled TV sets with underscan/overscan* support, the full active video can be accurately displayed.
Some HDMI™ HDTV sets may not support this feature. If underscan/overscan* is NOT supported, the top, bottom,
left and right border of the active video may be screened, and the S/PDIF audio may not sound right.
2. Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel analog audio
applications.
3. S/PDIF audio input can support 2 out of the 8-channel audio input.
4. S/PDIF only supports 48kHz audio sample rate. Other than this rate, the input digital audio should be adjusted to
48kHz in order to get audio signal correctly sent.
*The underscan mode displays the full video frame, which reveals content on the edge that is recorded. In overscan,
the field monitor zooms in to the area that would be visible on most televisions. Set the field monitor to underscan if
your video will be viewed on a computer monitor or shown with a projector and also to look for light stands, micro-
phones, and other unwanted objects on the edges of your shot. Set it to overscan to see how the video will look on a
television.
• Silicon Image Chip-Sets allow 99.99% compatibility with all the AV gear (we only use Best)
• HDMI™ and HDCP 2.0 compliant
• DVI video bandwidth up to 165MHz
• Coaxial S/PDIF and Stereo analog audio input supported
INTRODUCTION
PACKAGE CONTENTS
EDID LEARNING
NOTICE
FEATURES
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2