Audiovox AVR-1228 VCR User Manual


 
21
Timer recording
There are four timer modes: One time, Daily, Weekdays,
and Weekly
1 Be certain to do the tasks in the section, “Preparing
to record a program,” as shown on previous page.
2 Make certain the clock is set to the correct time.
3 Press MENU to display the menu.
4 Press 1 to select Timer Recordings.
5 Press 1 to select Make a New Program.
6 Press 1 for One Time; 2 for Daily; 3 for Weekdays,
or 4 for Weekly.
7 Use 0-9 to enter the channel number to record.
While the VCR is in the CABLE mode, if a channel
over 100 is desired, press 100’s key and then the
next 2 digits in order.
PROGRAM1 (ONE TIME)
Channel 06 Cable
Start Time –
:
End Time – :
Start Date – / /
Tape Speed EP
Press CLEAR to correct
Press MENU to cancel
PROGRAM1 (ONE TIME)
Channel –
Start Time – :
End Time – :
Start Date – / /
Tape Speed EP
Press MENU to cancel
How often do you want
to record program?
1 One Time
2 Daily (Sun-Sat)
3 Weekdays (Mon-Fri)
4 Weekly (Once a week)
Press MENU to exit
TIMER RECORDINGS
1 Make a New Program
2 Review/Cancel Programs
Press MENU to exit
AUDIOVOX Video Cassette Recorder User’s Guide
Recording programs, continued
Timer recording allows
you to record up to eight
one year in advance.
Once you have set the
timer for timer recording,
the VCR will turn on,
record the program you
selected, and then shut off
automatically.
DV -K286N-SJ (AUDIOVOX) 98.5.4. 99.12.10 10:9 AM ˘`21