Audiovox AVR-1228 VCR User Manual


 
33
side of the remote sensor center and no more than
23 feet from the VCR.
Make sure there is no obstruction between the
remote control and the VCR.
Timer clock does not work.
Make sure the VCR is plugged in and receiving
power.
If the unit has been without power for some period
of time, you must reset the clock and all your timer
programs.
Video cassette won’t go into the cassette
compartment.
Make sure there is not a tape already loaded into the
cassette compartment.
Insert the video cassette with the label side up.
VCR and remote control buttons don’t work.
The REW button does not work at the very beginning of a
video cassette. The FF, PLAY and REC/OTR buttons do not
work at the end of a video cassette.
Emergency indicator is blinking.
Press POWER to stop the indicator from blinking. If the
emergency indicator continues to blink, contact a service
technician.
The VCR buzzes when it is on.
The VCR may be in standby mode and the motor is
running. This sound is normal.
Video cassette recorder doesn’t rewind all the way
to the end.
To avoid video cassette tape damage, the VCR stops
rewinding near the end of the tape and then slowly
finishes rewinding. Do not prematurely eject the tape.
AUDIOVOX Video Cassette Recorder User’s Guide
DV -K286N-SJ (AUDIOVOX) 98.5.4. 99.12.10 10:9 AM ˘`33