Audiovox DVD Home Theater System DVD Player User Manual


 
E - 10
Setup
(continued to next page)(continued to next page)
(continued to next page)(continued to next page)
(continued to next page)
FM
Connect FM antenna
(included) to the FM
ANTENNA jacks.
AM
Connect the loop antenna
(included) to the AM LOOP
ANTENNA terminals.
A.Connecting your TV
The Unit can be connected to your TV in several different ways, depending on the design of your TV.
RCA Audio/Video Jacks
Use the included Audio/Video cable.
1. Connect the VIDEO OUT and left/right AUDIO OUT jacks to the VIDEO and left/right AUDIO IN jacks on your TV.
or
S-Video Jack
Use an S-Video cable (sold separately) and the Audio/Video cable (included).
1. Use an S-Video cable to connect the S-VIDEO (DVD) jack on your Unit to the S-VIDEO IN jack on your TV.
or
Coaxial Antenna Jack
Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In order to connect this Unit to
these TVs, you must purchase an RF modulator (available in the Audio/Video department of most electronics retailers
or at http://www.18002526123.com) and follow the instructions included with it.
For better reception
AM(MW) LOOP ANTENNA (SUPPLIED)
To wall outlet
FM antenna
DVD Unit
VIDEO IN
AUDIO IN
TV
To AUDIO IN
(white)
(red)
(yellow)
To AUDIO OUT
(white)(red)(yellow)