Filter
Top Products
24
Q. Setup DVD
1. General Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen of
the Setup Menu. The “General Setup Page” will also appear. At the same time,
“General Setup” is highlighted. Press ‘SETUP’ again to exit the Setup Menu.
2)Press the ENTER button, “TV Display” is highlighted.
3) Press the
or
button to select the other menus in general setup page.
4) Press to enter the sub menu.
5) Press the
or
button to select the sub menu and press the ENTER to
confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press to return the previous menu.
a) TV Display
* Normal/PS: When the player outputs signal to a normal TV, a normal
picture is shown on the full screen.
* Normal/LB: When the player outputs signal to a normal TV, a normal
picture is shown on the screen with a black strip at both the top and
bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a wide picture
is shown on the full screen.
b) Angle Mark
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are disc
dependent.