Filter
Top Products
12
CONNECTIONS
CONNECTING A TV ANTENNA/CABLE/SATELLITE
To view television channels correctly, a signal must be received from one of the following
sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Connecting a Digital Antenna
The tuner in this TV receives ATSC TV signals from an antenna.
This digital TV can receive standard (SDTV) and high definition
(HDTV) over the air broadcasts.
Connecting an Analog Antenna or Device
The tuner in this TV can receive NTSC TV signals, analog cable
signals or the RF output from a satellite receiver, VCR or cable
box.
TV ANTENNA CABLE
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the right (red) and left (white) audio OUTPUT from
this unit to the right (red) and left (white) audio INPUT on
your amplifier. Refer to your amplifier’s user manual for
more information.
Note:
To control the audio, both the TV and the amplifier must be
turned on, and the volume of the amplifier must be set
above 0, or you will not hear any sound.
If you want to hear the sound from the amplifier only, press
the VOL – button on the TV to decrease the volume or press
the MUTE button on the remote control to turn off the
sound.
2115CS1-DC-1-25.pmd 20/04/2007, 15:1912