Filter
Top Products
E - 21
CD/DVD OPERATION
PLAYING A DISC
1. Press the STANDBY/ON button to turn on the unit.
2. Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on the remote,
then press the ENTER button.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
“click”.
5. Push the disc tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of DVD, or start playing the DVD. If the unit does not automatically start playing the
DVD, press the PLAY button.
PLAYING A PICTURE FILE DISC
This unit can play JPG les recorded on CD-R and CD-RW discs.
1. Press the PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
“click”.
3. Push the disc tray to close the disc door.
4. The unit will load the disc and automatically display the contents of the disc on the screen, while also
beginning to play the picture le. These les will then be played back one by one.
5. Press the STOP button to go to the folder list.
6. Press the or button to highlight a le to play. Press the PLAY button to start playback.
NOTE
• You can press the PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
• You also can use the GOTO function or use the numbered buttons to enter the image number to quickly
select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the PAUSE button. To resume normal playback, press the PLAY button. Each time you press
the PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button
will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the PREV button to go back to previous chapters/tracks.
• Press the NEXT button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited
operation during playback. For example, many DVDs do not allow users to skip government warnings,
or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction
notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted
by the unit or disc.
FPE1508DV_UL_IB_MSTAR+MTK_E21-27.indd 21 1/10/2008 10:15:24 AM