Audiovox FPE1907 Flat Panel Television User Manual


 
22
TROUBLE SHOOTING GUIDE
Check the location of the antenna and adjust it if
neccessary.
Make sure the antenna cable is connected firmly.
Make sure all input cables are firmly connected.
Increase the volume.
Check whether the mute function has been activated on
the Remote Control.
Check the Picture setting within the Setup menu.
• Check to make sure the program you are watching is
broadcast in Color and not Black & White.
Make sure the unit is plugged in and turned on.
Make sure that the TV mode is selected.
Try a new channel to check for possible station trouble.
Make sure the antenna is connected properly.
Increase the volume.
• Make sure the antenna or audio/video source device is
working properly.
Make sure all cables are connected firmly.
Check for local interference.
Make sure there are no unshielded electrical devices nearby
that are causing interference.
Turn the TV off for 30 minutes, then try it again.
Bad Picture (snow,
multiple images,
distortion, blurry)
No sound.
Black and white
picture.
No picture or sound.
Colored patches of
picture.
SYMPTOM CAUSE (AND REMEDY)
Check that the AC power cord is connected.
Turn on the unit.
Remove any obstacles between the remote and the unit.
Use the remote near the unit.
Point the remote at the remote sensor on the unit.
Replace the battery in the remote with a new one.
No power.
The remote does not
function.
PLV36190CS1_IB_ENG_AUD.pmd 20/04/2007, 16:2222