Preparations
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a cloth.
<The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
Using the Remote Control
<Use the remote control by pointing it towards the remote sensor window
of the set. Objects between the remote control and sensor window may
Cautions regarding use of remote control
<Do not expose the remote control to shock. In addition, do not expose the
remote control to liquids, and do not place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation of
<The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or
operate the remote control closer to the remote sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
Open the battery
1
Insert two size-AAA
2 3
Note: This illustration is for reference only. The remote sensor may be in
different locations on different models.
5
Replace the battery
Install two "AAA"
batteries matching
the +/- polarities of
the battery to the +/-
marks inside the
0
3
3
0
5m