Main Frame
TVPC Frame
Note:
The TVPC function is available only when the main frame is in VGA/DVI mode (aspect ratio is 16:9) and the
vertical frequency is 60 Hz.
4
You may quickly open or close TVPC frame by using the TVPC button directly.
4
Audio is from the main picture only.
Viewing the TVPC
TVPC Operations
MAIN MENU
TVPC On/Off
Source
H Position
V Position
Size
PBP
Press Menu to display the menu main page.
1
Press CH repeatedly to select TVPC item.5/6
2
Press Enter to access the submenu.
3
Press Enter to select On or Off.
4
The TVPC On/Off item will be highlighted automatically.
On
Selecting the Signal Source for the TVPC Frame
MAIN MENU
TVPC On/Off
Source
H Position
V Position
Size
PBP
RF
Press Menu to display the menu main page.
1
Press CH repeatedly to select TVPC item.5/6
2
Press Enter to access the submenu.
3
Press CH repeatedly to select Source item.5/6
4
Press Enter repeatedly to select signal source for the TVPC frame.
5
Note:
You may quickly select signal source for the TVPC frame by using the P.S. button.
You may select RF, Video1, Video2, SVideo or YPbPr for the TVPC Frame.
Changing Channels for the TVPC Frame
When the TVPC frame is in TV mode, press the up or down button to change channels.
When you press the up or down, the unit changes channels in sequence. You will see all the channels that the unit has
memorized.
You will not see channels that were erased.
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
30