Filter
Top Products
Channel Preset
1. Press MENU button repeatedly to display CHANNEL SETTING
menu.
2. Press CH5 or CH6 button to select item.
3. Press VOL+ or VOL- button to confirm or adjust selected item.
Enter into CHANNEL SETTING menu and
select Source item.
Press VOL- or VOL+ button to select
Antenna or Cable.
Antenna: If using a VHF/UHF antenna (2-68).
Cable: If using Cable TV (2-125).
Antenna / Cable selection
To enter into CHANNEL SETTING menu
Fine tuning
Use 0~9 digit buttons or CH5/6 buttons to
select the desired channel, then enter into
CHANNEL SETTING menu and select
Auto fine tune item. Press VOL+ button to
select ON to activate the auto fine tune.
In area of inferior broadcast conditions where adjustment is necessary
for a better picture and sound, use Fine tuning.
Please enter into CHANNEL SETTING menu and select Auto Search
item.
Press VOL- or VOL+ button to start Auto Search and all active
programs will be memorized.
During the process of Auto Search, pressing
MENU button will stop Auto Search.
Auto Search
Antenna Auto searching
Press <Menu> to escape
VHFL
Adding and skipping channels
After auto search, you can add or skip channels as follows:
Select a channel to be added or skipped by direct channel select
buttons.
Enter into CHANNEL SETTING menu and
select Skip item.
Press VOL- or VOL+ button to select On or
Off.
Skip On: To skip the current channel.
Skip Off: To add the current channel.
CHANNEL SETTING
Auto search
Source
Current Prog
Skip
12
ON
<LEFT> or <RIGHT> key to change
Auto fine tune
Antenna
OFF
CHANNEL SETTING
Auto search
Source
Current Prog
Skip
12
ON
<LEFT> or <RIGHT> key to change
Auto fine tune
Antenna
OFF
28
CHANNEL SETTING
Auto search
Source
Current Prog
Skip
12
ON
<LEFT> or <RIGHT> key to change
Auto fine tune
Antenna
OFF
CHANNEL SETTING
Auto search
Source
Current Prog
Skip
12
ON
<LEFT> or <RIGHT> key to change
Auto fine tune
Antenna
OFF
22
* To exit the menu, press
ENTER button.
Operations in TV mode